2017 Good Quality Vibrating Hopper Feeder - JDG-type belt feeder – Jinte

Product introduction:

On the basis of K reciprocating feeder, JDG belt feeder changes the reciprocating mechanism into belt conveyor to realize continuous feeding. Meanwhile, it changes the feeding movement from sliding friction to rolling friction, which greatly increases the handling capacity, greatly reduces the friction coefficient and significantly reduces the power consumption. This machine is especially suitable for continuous and even feeding of coal.

Features:

1. Large production capacity;

2. Small volume; light weight;

3. Convenient for downhole transportation and installation; reduce downhole workload;

4. A larger regulating range of feeding quantity can realize stepless speed regulation ability;

5. Featured by low energy consumption, low noise, smooth operation, uniform and stable feeding and easy adjustment;

6. It is reasonable design, simple and reliable structure, easy to disassemble.

Structure:

This product is mainly composed of driving device, coupling, bar and bar gate, chute, head funnel, frame, retaining roller, supporting roller, head sweeper, driving roller, reversing roller, tensioning device, etc.

Working principle:

The material in the bin enters the chute through the connecting section and the sluice gate and falls onto the rubber belt. When the rubber belt is stationary, the material stops moving by the internal friction. When the driving drum starts to rotate under the drive of external force, it drives the rubber belt to move, and the rubber belt drives the material guiding funnel and outlet on it, and the material is discharged from the outlet continuously to complete the feeding process. The un-cleaned material bonded to the tape is scraped into the head funnel by the head sweeper.

Technical parameters: