Good quality Drum Screens Design - Coal slurry trommel drum screen – Jinte

Introduction:

Coal slurry drum screen is a Screening Machine designed and manufactured for screening materials with high humidity, high viscosity, which are not easy to screen and easy to block screen hole. Especially suitable for sticky and wet material screening, screen hole is not easy to block, which is suitable for raw coal, gravel and other materials screening.

How coal slurry Trommel Drum Screen work?

The reducer motor is connected with the drum shaft through the coupling, which drives the drum to rotate around its axis. When the material enters the drum device, due to the rotation of the drum device, the qualified material is discharged through the sieve hole, while the unqualified material is discharged through the end of the drum.

Key features:

The Trommel Drum Screen has a completely sealed structure. When the screen is replaced, it can be replaced by opening the sealing cover of the machine body, which is convenient for operation and maintenance.

1. stable performance

2. no clogging of sieve holes, high screening efficiency, large processing capacity

3. no vibration, no pollution

4. low production capacity of the same production capacity

5. energy saving

6. an ideal replacement product for the existing imported vibrating screen.

Application:

1. alumina plants

2. power plants

3. coking plants

4. building materials metallurgy plants

5. coal chemical industry

6. mining and other industries

Wanna see the delivery site, please click here: https://www.hnjinte.com/news/delivery-of-dalian-hengli-petrochemical-drum-screen

Technical Parameters:

Lubrication and maintenance of screening equipment: 

1. Always pay attention to and timely lubricate all parts of the equipment to ensure the normal operation of the machine and extend the service life of the equipment.

2. The grease used by the machine is calcium-based grease.

3. Before the drum screen leaves the factory, each lubricating part shall be filled with grease. Users determine the lubrication cycle according to specific operating conditions. The device body is provided with two lubrication parts, which are on the bearing seat of the head and tail.

4. Lubrication of equipment should be carried out after stopping.

5. It is strictly prohibited to adjust the equipment during operation.

6. Equipment maintenance

(1) the screen machine shall be cared and managed by special personnel.

(2) The maintenance and repair of the trommel screen must be carried out after the shutdown. It is strictly forbidden to maintain and repair the equipment during operation.

(3) Equipment management, maintenance personnel should often patrol the operation of the equipment, such as: whether the fasteners are reliable, whether the rotation is flexible. After working, clean dirt from equipment screens.