High reputation Mine Feeder - YK circular vibrating screen – Jinte

Introduction:

YK series circular vibrating screen is a product developed by our factory according to the needs of customers and absorbing the advanced technology in China. Its vibration parameters are similar to those of the screen machine produced by KHD company in Germany. This series of screen box movement track is circular

Working principle and structure:

1. This series of screen is mainly composed of screen box, screen mesh, vibrator and damping spring. The vibrator is installed on the side plate of the screen box, and driven by the motor through the coupling to rotate, generating centrifugal inertia force, forcing the screen box to vibration.

2. According to material varieties and user requirements, high manganese steel textile screen, punching screen plate and rubber screen plate can be used.

3. There are two kinds of screen plates: single and double layers. All kinds of screen plates can meet the requirements of high screening efficiency, long life and no blocking of holes.

4. This series of screen machine is mounted in a pedestal type. Screen surface Angle adjustment can be achieved by changing the height of the spring support position.

5. The motor can be installed on the left side of the screen frame, or on the right side of the screen frame. If there is no special requirement, the manufacturer can supply the motor according to the right side of the material movement direction.

Applicable materials:

√ coal

√ limestone

√ gravel

√ metal or non-metal ore

√ other materials screening.

Use & Maintenance:

1. Vibrating screen should be started when there is no material on the screen surface, try to avoid starting with material, the screen machine can only feed after smooth operation. Stop feeding before stopping the machine. Stop the machine after the screen surface material is eliminated.

2. In the process of work should often observe the operation of the screen machine, such as found that the movement is abnormal or abnormal sound, should be promptly shut down for inspection, find out the reason, troubleshooting.

3. The vibrator bearing is lubricated with no. 2 lithium grease. Under normal conditions, grease should be lubricated every two months. After the vibrator has been in use for 6 months, check the grease condition. If dry or hard, clean and replace the grease, and clean and check the bearing once a year.

Model

Screen Surface Area (㎡)

Feeding Granularity (mm)

Processing Capacity (t/h)

Sieve Pore Size (mm)

Vibration Frequency (Hz)

Motor Model

Motor Power (Kw)

Single Point Dynamic Load (N)

2.88

≤200

70-250

10-40

16

Y132M1-6

4.0

900

2YK1224

2*2.88

≤200

70-250

10-40

16

Y132M2-6

5.5

1230

YK1530

4.5

≤400

200-650

10-100

16

Y160M-6

7.5

1350

2YK1530

2*4.5

≤400

200-650

10-40

16

Y160M-6

7.5

1750

YK1536

5.4

≤400

250-750

10-40

16

Y160L-6

11*2

1750

2YK1536

2*5.4

≤400

250-750

10-40

16

Y160L-6

11*2

1950

YK1836

6.48

≤400

250-750

10-40

16

Y160L-6

15

1850

2YK1836

2*6.48

≤400

250-750

10-40

16

Y180L-6

18.5

2200

YK1848

8.64

≤400

250-850

10-40

12.25

Y200L1-6

22

2120

2YK1848

2*8.64

≤400

250-850

10-40

12.25

Y225M-8

22

2540

YK2148

10.08

≤400

250-1000

10-40

12.25

Y225M-8

22

1310

2YK2148

2*10.08

≤400

250-1000

10-40

12.25

Y225M-8

30

1550

YK2160

12.6

≤400

250-1200

10-40

12.25

Y250M-8

30

1510

2YK2160

2*12.6

≤400

250-1200

10-40

12.25

Y250M-8

30

1820

YK2665

15

≤400

250-1400

10-40

12.25

Y280S-8

37

1750

2YK2665

2*15

≤400

250-1400

10-40

12.25

Y280S-8

37

2100

YA (2)3e39c593ace700d106e4bf4e0f6530e