Hot Selling for Conveyor System - FHS arc screen – Jinte

Product Detail

Introduction:

FHS arc screen is mainly used for pre-dewatering, desilting, disintermediation and grading recovery of coal slurry in coal preparation plant and ore dressing plant. Slurry realizes solid-liquid separation under the action of centrifugal force. The slurry can remove 60%-70% of the water in advance through the arc screen surface to ensure enough water spraying on the linear vibrating screen to clean the fine mud and medium adhered to the coal particles, which plays a key role in reducing product ash content and medium consumption.

FHS arc screen is made up of three parts: screen box, arc screen plate and base. The screen box adopts pivot steering structure, which can rotate 180°, and can be used in the process of using, it can not only extend the service life of stainless steel screen plate, but also improve the effect of dewatering, desilting and disintermedium.

Features & Advantages:

1. The curved screen surface and the screen frame adopt the pivotal special structure, which can rotate 180 degrees and extend the service life of the screen surface.

2. The curved screen is turned over by the feeding box, the screen box and the screen base, so that the position of the feeding end and the discharging end can be adjusted to achieve uniform wear and prolong the applicable life.

3. Flexible and convenient operation, easy to repair

4. Low noise, stable performance and compact structure

5. Large amount of processing, saving energy mmexport1541810650284

Technical Parameters:

Model	Screen Width (mm）	Processing Capacity	Sieve Pore（mm）	Radius (mm）	Wrap Angle（°）	Screen Strip Width (mm）	Weight(Kg）
Model	Screen Width (mm）	(m³/h）	Sieve Pore（mm）	Radius (mm）	Wrap Angle（°）	Screen Strip Width (mm）	Weight(Kg）
FHS-09201	920	50-110	0.4-1.0	1016	45	2.38	750
FHS-1220I	1220	70-145	0.4-1.0	1016	45	2.38	880
FHS-15201	1520	85-180	0.4-1.0	1016	45	2.38	1090
FHS-1820I	1820	105-216	0.4-1.0	1016	45	2.38	1200
FHS-2120I	2120	122-250	0.4-1.0	1016	45	2.38	1320
FHS-2420I	2420	140-285	0.4-1.0	1016	45	2.38	1450
FHS-3000I	3000	175-355	0.4-1.0	1016	45	2.38	1780
FHS-3200I	3200	190-375	0.4-1.0	1016	45	2.38	1920
FHS-0920 II	920	70-140	0.4-1.0	1016	60	2.38	850
FHS-1220 II	1220	95-190	0.4-1.0	1016	60	2.38	1000
FHS-1520 II	1520	119-240	0.4-1.0	1016	60	2.38	1120
FHS-1820 II	1820	143-288	0.4-1.0	1016	60	2.38	1300
FHS-2120 II	2120	167-336	0.4-1.0	1016	60	2.38	1400
FHS-2420 II	2420	191-336	0.4-1.0	1016	60	2.38	1520
FHS-3000 II	3000	240-430	0.4-1.0	1016	60	2.38	1900
FHS-3200 II	3200	280-460	0.4-1.0	1016	60	2.38	2120
FHS-0920 III	920	85-180	0.4-1.0	2032	45	2.38	950
FHS-1220 III	1220	115-240	0.4-1.0	2032	45	2.38	1120
FHS-1520 III	1520	145-300	0.4-1.0	2032	45	2.38	1230
FHS-1820 III	1820	175-360	0.4-1.0	2032	45	2.38	1430
FHS-2120 III	2120	205-420	0.4-1.0	2032	45	2.38	1530
FHS-2420 III	2420	235-480	0.4-1.0	2032	45	2.38	1650
FHS-3000 III	3000	295-600	0.4-1.0	2032	45	2.38	2050
FHS-3200 III	3200	330-650	0.4-1.0	2032	45	2.38	2240
FHS-0920 IV	920	115-240	0.4-1.0	2032	60	2.38	1050
FHS-1220 IV	1220	156-320	0.4-1.0	2032	60	2.38	1120
FHS-1520 IV	1520	195-400	0.4-1.0	2032	60	2.38	1310
FHS-1820 IV	1820	234-480	0.4-1.0	2032	60	2.38	1500
FHS-2120 IV	2120	272-560	0.4-1.0	2032	60	2.38	1640
FHS-2420 IV	2420	312-560	0.4-1.0	2032	60	2.38	1780
FHS-3000 IV	3000	392-720	0.4-1.0	2032	60	2.38	2150
FHS-3200 IV	3200	430-800	0.4-1.0	2032	60	2.38	2350