The installation of the screen uses the opportunity of the sintering machine to stop production and maintenance. One linear vibrating screen is removed, and two parallel cantilever screen vibrating screens are installed in the original position. Four linear vibrating screens were removed one after another, eight cantilever screen vibrating screens were installed, and four were installed in each of the three screening rooms and the four screening rooms.
Reconstruction of belt conveyor The original linear vibrating screen has a long screen body, and it is necessary to adapt and lengthen the belt conveyor that feeds the screen material. The non-standard cantilever head wheel bracket is used to change the drive of the original motor reducer to a new type of motor-mounted electric drum. The driving space is reduced, the re-production of the cement foundation is avoided, and the engineering cost and time are saved.
Reconstruction of the feeding hopper of the vibrating screen Because the two vibrating screens work side by side, the feeding hopper is designed into a silo type according to the technological performance of the sintered ore to allow friction between materials, reduce the erosion of the hopper, and eliminate the traditional hopper. No funnel leakage occurred after the hopper was put into operation.