The solution of the rotary vibrating screen “low efficiency, slow row”
1. Check if the sieve machine is in the horizontal state when the vibrating screen is working.
Recommendation: You can help solve this problem by adding or subtracting the damping feet of the vibrating screen.
2. Check that the screen and the discharge port of the vibrating screen are at the same level.
Recommendation: Contact the manufacturer.
3. Adjust the angle of the eccentric block of the vibrating motor in the vibrating screen to change the speed of the material moving on the screen surface. The smaller the angle, the faster the material will spread outward; the larger the angle, the slower the material will be. The outside is spread out, and the angle of the eccentric block of the vibration motor should be ≥5°.
In addition, if the angle of the eccentric block of the vibration motor is too small, the accuracy of the screening will be affected, so the user should adjust it according to the condition of the material and the accuracy of the screening.
If u have any concern about equipment, please donot hesitate to contact us. Here is our wedsite site: https://www.hnjinte.com
WhatsApp: 15090360573
TEL: +86 18037396988
E-mail: jintejixie@yeah.net
