Introduction:
The wave – shaped fender belt conveyor with large inclination Angle is the most ideal conveyer of special bulk material in the new generation.
The machine has wavy flange and diaphragm, wide use, excellent performance, widely used in mining, metallurgy, coal chemical industry, building materials, electric power, light industry, food, port and other industries.
This machine has large conveying capacity, up to 120 cubic meters per hour, vertical lifting height up to 80 meters, wide application range, compact process layout, smooth transportation, low noise, no loose material, no dust flying, etc.
Technical Parameters:
| Baseband Width B（mm） |
Hemline Height H(mm） | Diaphragm Height H(mm) | Belt Speed（V)(m/s） | Drive Drum Diameter D（mm） | The Diameter Of The Roller D1（mm） | Roller Diameter D2（mm） |
Nominal Inclination (a) | Allowable Inclination (a1) | Transmission | |||||
| ⅠType | Power （Kw） |
Ⅱ Type | Power （Kw） |
Ⅲ Type | Power （Kw） |
|||||||||
| 500 | 80 | 75 | 400 | 320 | Φ89 | 0- | Any angle within 0-90 ° is acceptable | Electric Roller | 1.5-7.5 | Y Series | 3-11 | Electric Motor | 1.5-30 | |
| 100 | 90 | 500 | 400 | 30° | (with backstop) | Electric Motor + | + | 1.5-5 | ||||||
| 120 | 110 | 400 | 35° | Triangle Tape | Coupling | |||||||||
| 650 | 100 | 90 | 0.6 | 400 | 500 | 40° | 1.5-11 | + | 3-15 | + | ||||
| 500 | 400 | 45° | Shaft-mounted Reducer | Retarder | ||||||||||
| 120 | 110 | 630 | 50° | + | 2.2-9 | |||||||||
| 160 | 150 | 1 | 55° | Transmission Drum | Transmission Drum | |||||||||
| 800 | 120 | 110 | 1.25 | 500 | 400 | 60° | 1.5-37 | 3-22 | ||||||
| 160 | 150 | 630 | 500 | 65° | (with backstop) | |||||||||
| 200 | 180 | 1.6 | 800 | 630 | 70° | |||||||||
| 1000 | 160 | 150 | 2 | 630 | 500 | Φ108 | 75° | 1.5-55 | (electricity per unit) | |||||
| 800 | 630 | 80° | ||||||||||||
| 1000 | 800 | 80° | (Drive Computing) | |||||||||||
| 90° | ||||||||||||||
| 200 | 180 | |||||||||||||
| 240 | 220 | 2.5 | 4-110 | |||||||||||
| 1200 | 200 | 180 | 3.15 | 630 | 500 | 1.5-90 | ||||||||
| 240 | 220 | 800 | 630 | |||||||||||
| 300 | 240 | 4 | 1000 | 800 | ||||||||||
| 1250 | 1000 | |||||||||||||
| 1400 | 240 | 220 | 800 | 630 | 5.5-185 | |||||||||
| 1000 | 1000 | |||||||||||||
| 300 | 240 | 1250 | 1250 | |||||||||||
| 400 | 350 | 1500 | ||||||||||||