Ordinary Discount Belt Conveyor Roller - SH-type rotary screen – Jinte

Introduction:

1. SH – type rotary screen also called compound fertilizer special screen, can be four – level screening. The finished product area has two sections.

2. SH type rotary screen has storehouse. The lower part of the storehouse has the fan gate, and the coarse material section has the chute which can send the coarse material directly to the transport machinery, so as to facilitate the process layout. If the user requests the finished product area to set only one section, namely the three level rotary screen, please explain it when ordering.

Construction:

1.motor,

2. reducer,

3. drum device,

4. frame and other institutions.

Features & Advantages:

1. Wide adaptability of materials:

rotary screen is widely used in the screening of all kinds of materials. No matter it is low-quality coal, coal slime, soot or other materials, all of them are screened smoothly.

2. Simple and diverse feeding methods:

the feeding port of rotary screen can be designed according to the actual site. No matter it is belt, funnel or other feeding methods, it can feed smoothly without taking special measures.

3. High screening efficiency:

the equipment can be equipped with a comb type cleaning and screening mechanism. In the screening process, no matter how dirty and miscellaneous the materials into the sieve cylinder are, they can be screened, thereby improving the screening efficiency of the equipment.

4. Large handling capacity:

in the same size, the circle area is larger than other shape area, so the effective screen area is large, so that the material can fully contact the screen, so the handling capacity per unit time is large. It is easy to be large because of its simple structure, convenient arrangement, novel and mature technology.

5. Low energy consumption:

the power of rotary screen motor is small, which is one half to one third of other screen types, and the running time is only one half of other screen types when handling the same amount of materials, so the energy consumption is low.

6. Good working environment:

the whole sieve cylinder can be sealed with a sealed isolation cover to completely remove dust flying and block splashes in the screening cycle, avoiding pollution to the working environment.

7. Low noise of equipment:

during the operation of the rotary screen, due to its low rotary speed and isolation from the outside world, the noise cannot be transmitted to the outside, thus reducing the noise of the equipment.

8. Long service life, small maintenance:

rotary screen is composed of several circular mesh. Its total screening area is much larger than the screening area of other screen types, and the screening efficiency is high, the equipment running time is short, so the service life is long, has less vulnerable parts, and small maintenance.

9. Convenient maintenance:

the sealing isolation cover of the equipment can be disassembled, which will not affect the normal operation of the machine and make maintenance very convenient.

Technical parameters :

Lubrication and maintenance of equipment:

(1) pay attention to and timely lubricate all parts of the equipment. Ensure the normal operation of the machine and extend the service life of the equipment.

(2) the grease used by this machine is calcium-based grease.

(3) before the machine leaves the factory, all parts to be lubricated are filled with grease. Users determine the lubrication cycle according to specific operating conditions. The device

body is provided with two lubrication parts, which are on the bearing seat of the head and tail.

(4) the lubrication of the equipment should be conducted after stopping, and the motor and reducer should follow the instructions.

(5) it is strictly prohibited to adjust the equipment during operation.

Equipment maintenance and management:

(1) the equipment shall be cared and managed by special personnel

(2) the maintenance and repair of the equipment must be carried out after the shutdown. It is strictly forbidden to maintain and repair the equipment during operation.

(3) equipment management, maintenance personnel should often patrol the operation of the equipment, such as: whether the solid parts are reliable, whether the rotating parts are

flexible. Equipment dirt must be cleaned after work.